[Jewelry making - Article 00147] - Re: [Orchid] Torch Problems - LPG

[Kay Davis]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have an idea, but just a small one. Some LPG suppliers add a
    desiccating agent to bind any water that gets into the cylinder,
    because internal rust is sometimes a problem with LPG tanks due to
    water contamination. I have been down that route and only found out
    about it when discussing it with Superior propane here in Quebec.
    It's a very fine powder that will pass trough normal orifice burners. 

    	I would suggest changing suppliers, good quality LPG doesn't need
    that additive. 

Kay

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________