[Jewelry making - Article 00009] - [Orchid] Filigree Soldering

[Fr. George Aquaro]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello again,

    Thanks to all of you for the great responses to my previous
    inquiries. Here's another one. 

    I am trying to solder some 2.5 oz. sterling medallions to a filigree
    backing.  The problem I am having is getting the medallion hot
    enough to melt the solder without damaging the filigree.  I've
    thought about either trying to solder with the filigree on a steel
    block (acting as heat sink) or placing the pieces in my kiln at 1200,
    then hitting the medallion with the torch for a final jump in heat. 

Any ideas?

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________