[Jewelry making - Article 01280] - Re: [Orchid] Ultrasonic disaster

[Phil Walker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi.

    This happens often with old ultrasonics that have been heated up a
    bit hot. It is most likely the little bits that vibrate (technical
    term) have fallen off the tank because the glue got too hot. if this
    is the case then you should be able to take it to a service agent to
    have them re attached. good luck. 

Phil W


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________