[Jewelry making - Article 01265] - Re: [Orchid] Using Delrin?

[jonathan presson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I'd search the Thomas Register http://www.thomasregister.com for
    delrin and try to find a local supplier. Though Small Parts Inc does
    have a wonderful selection of hard to find engineering parts and R&D
    stuff , their prices are a bit high.... If the thomas register fails
    you , try your local yellow pages for "plastics" or "engineering
    plastics"

    Depending on what you plan on using the delrin for their may be an
    easier/cheaper solution using another type of plastic such as nylon,
    nylatron, UHMW Polyethylene or such....

Jon P


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________