The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Vacuum casting seal problem  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Greg DeMark
Date: Fri Jan 21 22:04:09 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If you are using a table top vacuum caster and not one that allows
    you to drop the flask down into the machine you may want to try this
    as a possible solution. 

    First do not fill the flask even to the top ( actually bottom) with
    investment. Leave about 1/4 inch without investment. This will allow
    the vacuum to seal better. 

    If you are casting large flasks and you are not getting complete
    fills on your castings you can try adding some sprue tunnels that
    are open at the bottom of the flask. To do this add a few pieces of
    wax rod into the flask from the bottom and leave it over hang the
    bottom.  Make sure you attach it to the edge of the flask so it
    doesn't move when you fill it with investment.  Also make sure that
    you do not have it touching any of your wax models and try to keep
    it as far away from them as possible ( at least 1/2 inch ). Run the
    wax rod approximately 1/3 to 1/2 way into the flask.  Use two to
    three rods. 

    This along with not filling the flask level will allow you to get a
    better vacuum and pull. 

Good Luck
Greg DeMark
email: greg AT demarkjewelry.com
Website: www.demarkjewelry.com
Custom Jewelry - Handmade Jewelry - Antique Jewelry

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project