[Jewelry making - Article 00820] - Re: [Orchid] Purchasing vacuum wax injector

[The Doctor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I would also appreciate some advice on injecting wide flat pieces.

    I'm not a casting expert, but since you're already dealing with Rio,
    I'd suggest trying their Buckle wax before you buy a new injector. It
    is intended for lightweight, thin pieces. The part number is
    700-212/5 for the 5lb package. Substitute /50 for the 50lb package. 

James in SoFl 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________