[Jewelry making - Article 00652] - Re: [Orchid] Smith little torch

[Gail Smith]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Gerry,

    I had the same concern, but I switched. You can use your setup but
    you can't use the smaller tips, sizes 1. 2. and 3. You should also
    get a size 7 tip (not included in the set up) if you want to solder
    silver or larger stuff (bigger than a ring). I was assured this was
    safe (using the larger original tips) by my local welding supplier. I
    have been using these tips for 8 years without a problem. It's great
    to solder without goggles. You'll like it too.:) Go for it. 

Ciao
Gail


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________