[Jewelry making - Article 00607] - Re: [Orchid] Deep Draw Die Forming

[Sronan831]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    You will find the information you seek at
    http://www.bonnydoonengineering.com. While I am not sure if Phil's
    book is still available, the CD should answer all  of your
    questions. In addition, BD has a discussion group that would be glad
    to help direct you. 

    Lee Marshall's presses and tooling are the best way to go and I don't
    know  if I would take a risk with a home made 50 ton press. Lee will
    service his  presses as well which is a big plus, and there is a
    large variety of tooling  made specifically for the 20 ton as well as
    the 50 ton. 

    You might even be able to find some used presses around if a new one
    isn't in your budget. Contact me offline and I might be able to
    direct you to someone who might have one available. 

Susan Ronan
Coronado, CA  Thank heaven the rains have stopped!
sronan831 AT aol.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________