[Jewelry making - Article 00590] - Re: [Orchid] Large silver tubing for flutes

[Taylor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Brent, just form the required sized using whatever gage silver sheet
    he needs using a 'swadge block' to hammer one out, the hardest part
    may be in finding a draw plate with holes large enough. Tension
    solder along the seam is how I would close it up. 

    Although as a thought; I don't know how hand made tubing would
    affect sounds as compared to a solid manufactured tube - interested
    to know if you ever find out. 

Cheers,.
Tay

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________