[Jewelry making - Article 00588] - Re: [Orchid] Cappucchino maker as a Jewelry Steamer

[Brian Adam]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>         OK, I was intrigued by past mentions of using a cappucchino
>     maker as a jewelry steamer. I purchased one ( krups) from the
>     thrift store for 5 bucks. I took it home and dismantled it for the
>     core system. I figured I had to plug up the coffee drip part so it
>     can be used completely for steaming. 

    If you want steam, harness the frother, not the coffee drip part. 

    As any coffee addict will tell you (and I think I represent some of
    the nuttiest), coffee-making requires a certain temperature (90C -
    92C) which in fact is demonstrably lower than that for frothing the
    milk (100C). 

Brian
B r i a n   A d a m   
e y e g l a s s e s   j e w e l l e r y
Auckland NEW ZEALAND
www.adam.co.nz

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________