[Jewelry making - Article 00476] - Re: [Orchid] Custom wire rolling mill

[kevdan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I can make you rollers for your machine but I need to have one of
    your old rollers so I can copy the dimensions I have made several
    custom rollers and outboard dies for cavalin and durston rolling
    mills being that you are going to use stainless wire you should
    probably use o1 or a chrommoly for the rolls you can email me or
    call me at 520 751 6324 my name is Kevin Potter

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________