[Jewelry making - Article 00471] - Re: [Orchid] Harbor Freight Mini Rolling Mill for $190

[kevdan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The mill that harbour freight sells is not worth the money I have
    repaired two of them for people, the rollers crack most of them have
    been overhardened or not properly heat treated they break where the
    handle attaches and the frames crack, you would be better off buying
    a used one like a durston or a cavalin even if the rolls are damaged
    I can resurface them for fifty bucks if they are not totally
    trashed, if they are real bad I can anneal them and remachine them
    then reharden them and even do custom patterns in them  you can
    email me here or call me at 520 751 6324 Kevin Potter 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________