[Jewelry making - Article 00297] - Re: [Orchid] Do small butane soldering torches work?

[Carrie Nunes]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Someone else suggested using a propane torch assembly, so I'm
>     going to check that out this weekend. 

Hi Tracey,

    In your note that started this thread you expressed concern about
    having acetylene in your garage with your gas water heater. Please
    keep in mind for propane as well, it is heavier than air and will
    pool around the bottom of the room if you were to have a leak. Not a
    good thing to have happen around a pilot light. Please ask questions
    and get some safety info from your local welding supply place. Be
    safe so you can continue having fun! 

Carrie Nunes

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________