[Jewelry making - Article 00194] - Re: [Orchid] Buying a lathe

[LEESSILVER]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have a simple way to turn wax with a foredom handpiece mounted in 
    a Pana vice using simple scraping tools.  If any of you are looking
    for a  lathe to turn wax you might be interested in the paper I
    wrote about the Poor  Mans Wax Turning Process.  I have turned
    everything from rings to large 3.5  inch dia by 5 inch tall wax
    pots. The process is not a precise as a lathe  but one heck of a
    bunch cheaper. 

    I would be glad to send you a copy of the process, free, If you 
    send me your snail mail address.  The paper contains many photos and
    is  difficult to e-mail. The process was described in four issues of
    Lapidary  Journal, Dec 2002 and Jan-Mar 2003. 

Lee Epperson

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________