[Jewelry making - Article 00121] - Re: [Orchid] Position for clip-on earrings backs

[Betty Leeper]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>      I have only made a couple of pairs of clip-on earrings. I am
>     never sure where the  should be positioned. I have used sterling
>     backs. Would nickel be better? I have already searched the archives
>     for this.

    Unless these clip earrings are for yourself, never, never, never use
    nickel. Of all the metal allergies folks have, nickel is the most
    prevalent and most uncomfortable. If even the tiniest part of the
    nickel piece touches the ear, reactions can occur. 

    Good luck with the rest of your question. I'm interested in that
    point as well. 

Betty

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________