[Jewelry making - Article 01133] - Re: [Orchid] Buff rake

[Soul Of Wood]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    use 16 grit and lower,, old or new sanding discs,, 3 grit works
    well, or pieces of used or new sanding belts. 

    BTW, excellent place to get new clothback alum oxide is any place
    that buys rolls of cloth, and makes them into discs, belts, etc., for
    the industry (thomas' register), these places throw out, dumpsters
    full of new cloth - cutoffs, every garbage day(once a week), from 3
    grit all the way through to 600 or so, you go,, you ask,, they
    give,,, you can get a lifetime's worth in a few trips,, and you can
    buy some while your there, also autobody shops mostly use only the
    outer circumference of their 7in. discs(16,32grit), when grinding
    metal, the amount of discard is overwhelming, again, ask, get, this
    way we make art from refuse,,, 

dp


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________