[Jewelry making - Article 00343] - Re: [Orchid] Violite / Varisite

[Rjtwin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If the pieces were enameled the chances of picking the same enamel
    colors is astronomical since there are so many companies and so many
    colors not to mention skill levels and kiln temperatures,etc.  Since
    the cracks are similar on each earring, could you try to create a
    line of decorative metal running down the piece? That will change
    the original piece but save the artistic integrity of your work. The
    customer's approval, of course. Sketch a few ideas and see if it
    pleases the customer. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________