[Jewelry making - Article 00236] - Re: [Orchid] Burs tips and techniques?

[John Barton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I don't remember the thread that the message came under, but someone
    mentioned using a film canister with a felt wheel in it as a
    lubrcant container and daubing the bur or drill in it.This is a
    great idea and one similar to what I learned from someone many years
    ago.I use a small dark brown bottle(about two inches or less,tall)
    with a screw on lid stuffed to max capacity with cotton,then filled
    with oil of wintergreen.Works great and with a screw on lid the oil
    doesn't evaporate.Best wishes, John Barton 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________