[Jewelry making - Article 00210] - Re: [Orchid] Scoring lines in sterling

[Sydney]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Herb

    I have pretty good luck scoring sterling with a scribe and then
    deeping the line with jeweler's saw. I haven't done it in a while so
    there's probably a step I'm leaving out.... I remember making a 'v'
    notch and sawing into that, but stopping before I broke through to
    make a clean bend. 

Hope this helps
Syd
Ska's Treasures

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________