The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Chasing vs. graving  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Len and Judy Bjorkman
Date: Thu Dec 02 17:59:49 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Stephanie, assuming you'd like to try chasing/repousse, try doing
    some research on the process. 

    1.  There's a nice article on chasing and repousse on the Ganoksin
    web-site:  http://www.ganoksin.com/borisat/nenam/repousse.htm 

    2.  I found a compendium of miscellaneous information on chasing and
    repousse at:  www.artmetal.com/brambush/forging/proj04/page03.htm
    (this was a while back -- am not sure it's still there) 

    3.  If you have access to back issues of Lapidary Journal, the April
    2004 issue, p. 46ff., has an article and project on repousse by
    Valentin Yotkov  (lovely color photos, and see p. 20ff. for a
    discussion by Yotkov). 

    4.  Check a variety of jewelrymaking books out of the  library and
    read what little they  usually have on  this  topic, to see what
    suits you. 

    5.  Kathy Palochak gave me a reference to  the following bit of
    information:   

          Don't have a pitch bowl, but you need to give some form to a
          piece?  Place several pieces of felt  in a pile.  Nail the
          corners of the  felt pile to  a board.  Place your piece on the
          felt, using push pins or brads to  hold it in place.  Use your
          daps to form the metal. 

    I made a simple chasing tool out of brass rod (for chasing on brass).
    In the process of hammering out the end to shape, it hardened the
    metal enough so that it works on  annealed  brass. I use a  chasing
    hammer with it. For one particular leaf design, I hold the sheet
    metal  in place with brads nailed into some medium soft wood. This is
    not high-tech  or high-end,  but  it's straightforward and fun! 

Best wishes,
Judy Bjorkman

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project