[Jewelry making - Article 00087] - Re: [Orchid] Making copper grapes

[Tom Colson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

 Mike,

    You could take those plastic grapes, paint them with conductive
    paint, and electroform copper over them. If you start with a smooth
    surface and are patient (use a slow deposition rate) you can get a
    nice smooth copper surface...like a grape! If you want some texture,
    you can play with the process to get some amazing effects. 

    There are many refs on the web on how to home brew a copper
    electroforming setup. I believe the Orchid archives also contain some
    useful information. 

    Best of luck with your grapes! 

Tom Colson
Renaissance Gecko Designs

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________