[Jewelry making - Article 00045] - Re: [Orchid] Badeco vs. Foredom?

[Gerald]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi Lou and all! I prefer using my Badeco hammer, if you were asking
    that of me. I prefer my Badeco so much that I have TWO of them, one
    at the shop and one more for home-work. Using my Badeco is like
    having a "Rolls-Royce" at my bench..I have been using these two items
    for years and so far, they have kept up with my setting. When you pay
    the extra dollars, you know very well that in time of
    "setting-pressure", nothing will ever go wrong with them...NOTHING ! 

    I used to buy the other well known item and you just get what you
    pay for...cheap dollars gives you cheap results.."Long live
    Badeco"!..by the way for your information, inside "others" hammer, was
    a plastic implement actuating the exterior metal anvil.With Badeco,
    its metal AGAINST metal. Maybe they changed the 'insides' years ago,
    well this is now my only choice!...Gerry! 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________