[Jewelry making - Article 00828] - Re: [Orchid] Casting problem - course grainy surface

[Volpe, Constantino]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Don't forget to look at your burnout process  If you burn out too
    fast you can steam the wax in the flask and this can attach the
    investment causing breakdown  Follow the instructions of the
    investment manufacturer based on the size flask you are using 
  
Tino Volpe Metallurgist,
Technical Manager
Tiffany & Co
300 Maple Ridge Drive
Cumberland, RI 02864-8707  401-288-0124
Volpe AT Tiffany com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________