[Jewelry making - Article 00380] - [Orchid] Multiple flexshaft motors on one pedal

[KARAT46]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello Orchidians

    Most of the setters end up having more than one flexshaft motors.
    Working in tight quarters it is frustrating to struggle with 2 or 3
    foot pedals specially if they all look alike. 

    The question is directed to individuals who have built their own set
    up to work with 2 or 3 motors with one pedal. For an electrician I
    know this can be done easily with switches and junction boxes. I
    would like you to share your experience in building one for a friend
    of mine. 

    There are 2 units out there commercially available for about $150 to
    $200. The aim is to build your own. 

Regards,

Kenneth Singh
karat46 AT aol.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________