[Jewelry making - Article 00329] - [Orchid] Rough diamond replicas

[David Barzilay Lord of the Rings]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I need to have specially cut for me: SIX replicas of an octahedral
    diamond rough. They need to be LARGE, and must match visually. 

    They have to look like they are large enough to be cut into a 45mm
    round brilliant (although they won't actually be cut.) 

    Do any lapidists on the list have ON HAND, sufficient colorless
    rough (quartz, beryl, tourmaline, etc.) to do this project?  If I
    HAVE to, I will use glass, but I would prefer natural material. 

Thank you,
David Barzilay
Lord of the Rings
607 S Hill St Ste 850
Los Angeles, CA 90014-1718
213-488-9157

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________