[Jewelry making - Article 00311] - Re: [Orchid] Raku glaze on PMC3 Firing Temperature

[Jeanne M. Bellone]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Noel,

    Thanks so much for the suggestions.  I checked the place that I
    bought the glaze from.  There was no mention on their site as to cone
    for this particular glaze.  I will look again carefully at the bag
    and see if there is any mention of that.  I like your suggestion
    about mixing a glaze that will work at a temperature that won't melt
    my silver work.  I will email again when I have found out more
    information.  Thanks again!  Jeanne 

Jeanne M. Bellone
Vintage Treasures (est. June 2001)
http://www.rubylane.com/shops/vintage-treasures
Jewelcollect Registered Member
VFCJ Member
Orchid Member
Joolcrafting Member

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________