[Jewelry making - Article 00274] - Re: [Orchid] Ergonomics

[Gerald]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Peggy and all !

    My very own Opti-Visor is a number 5 which has a focal length of 6
    inches...I use at times a number 7 but this number will make you
    "bend over" too much. I am very comfortable with #5 lens, trust me.
    For some more detailed viewing I will use my trusty 10x power loupe.
    If anyone is going to use a number 7 or higher, you will definitely
    will be looking into neck pains and shoulder spasms along with lumbar
    loss of support. Now do we really need all of this overkill viewing
    at risk of our backs?..."Gerry, the Cyber-Setter!" 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________