[Jewelry making - Article 00152] - [Orchid] Blythe enamels

[mfs . vicenza]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello all,

    I have always used Blythe enamels of Johnson & Matthey with wery
    good results. Until some years ago I could have them in small
    quantities and freshly ground at the Italian partner of the same
    company. Now this is no more possible because, even if these enamels
    are still manufactured (fortunately !), they are available through
    the same partner both in powder (series 263) and in lumps (series
    262) only in a minimum quantity of Kg. 5 each type, which is too
    much for me. 

    In Italy the supplying of lumps form enamel is a big problem. Can you
    suggest me where I can find, in Europe or somewhere else, suppliers
    who can provide me with the Blythe enamels of J&M even in smaller
    quantities (1/2 Kg.) lumps form for every single type ? Thanks to all
    of you in advance 

Mariano from Italy
mfs.vicenza AT libero.it

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________