The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Cleaning a file  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Martin Niemeijer
Date: Wed Nov 03 20:59:02 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello Howard,

    The degreasing has nothing to do with preventing explosives.
    Therefore the amount of crease is not enough on a file. 

    The acids are strong enough to do there own decreasing. However the
    reason is, that you want to etch the surface of your rather expensive
    file very even. If the files are greased or otherwise dirty, parts
    the acid will react later to the dirty steel than the clean parts.
    The teeth of the file will not be of the same height after etching.
    The mixture I gave was from a book of 1936. And even I heard that
    this mixture goes back to the 19e century. 

    It has an deep etching effect on carbon steels. It eats the metal
    also very good in the grooves. I have tried other mixtures and acids,
    they will work, but this is fast and effective. And some mixtures
    only eat the top of the teeth away, and that is not what we want. 

    Be aware, the amount of acids is based on 100% strength. And need to
    be upgraded if you have less stronger acids. Less use of water. It is
    dangerous to work with HNO3 stronger than 60%. Stronger will fume and
    even react with water vapour. 

    But strong acids are nothing for the ignorant among us. When you
    mix, take safety precautions and always first water than add the
    acid. And always mix slowly. 

Greetings
Martin Niemeijer
Ndesign 
Cultuurwerkplaats R10
Rieteweg 10
8041 AK, Zwolle
The Netherlands
info AT ndesign.nl ;www.ndesign.nl
Phone +31 (0)38 7501258
Mobile phone +31 (0)651831576

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project