[Jewelry making - Article 01267] - Re: [Orchid] Is a small vibe tumbler practical?

[Greg DeMark]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Trevor,

    A vibratory tumbler will cut down on the finishing work but you
    still have to do your prefinish work before you tumble them and then
    you may still need to do some buffing afterwards. 

    I have used a number of different types of tumblers over the years
    and the one I am now using seems to be a good value for the results
    it gives. I am using a Thumler Ultra - Vibe 18 in the heavy duty
    grade. 

Good Luck
Greg DeMark
email: greg AT demarkjewelry.com
Website: www.demarkjewelry.com
Link Exchanges Welcomed

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________