[Jewelry making - Article 01152] - Re: [Orchid] Rectangular draw plate

[Trevor F]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     You can make a rectangular wire die to your own size and/or shape.


Hello group,

    In an offline discussion John Burgess has provided a photo and some
    additional details on the process he mentions above. Thinking that
    this material might be of interest to the group I have gathered the
    various pieces of this topic together on a single web page entitled
    "Making a Wire Die" at 

    http://www.touchmetal.com/handmadewiredie.html 

    My thanks go to John and Hanuman for their permission to reprint this
    material. 

Cheers, 
Trevor F.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________