[Jewelry making - Article 00476] - Re: [Orchid] Preserving patina surfaces

[Eileen Procter]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Namita,

    what kind of wax are you using?  The edges on the bracelets see the
    most wear and this is the most likely reason why the patina is not
    doing so well.  I'd suggest a hard wax - silicone or carnuba - but
    even then they'd need to be re-applied about once a year.  If you're
    still not happy, you could try a lacquer.  Wattyl makes one called
    Incralac.  It will yellow eventually (all lacquers will) but you
    shouldn't need to re-apply it for about 5 to 7 years.  Unfortunately,
    lacquers will tend towards a glossy appearance. 

Hope this helps
Eileen

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________