[Jewelry making - Article 00275] - Re: [Orchid] Experience with cyanide-free gold-plating?

[Fr. Alexis Duncan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    From my experience, the cyanide plating is far, far superior. I have
    used a few brands of the cyanide-free products and none of them
    really work like you would hope. The closest comes from Dalmar in
    Florida. The results are ok. However, for jewelry, again from my
    experience, I will only use the cyanide based stuff. I know it is
    dangerous, but if you are careful, perhaps it is well worth the
    caution. 

Fr. Alexis Duncan


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________