[Jewelry making - Article 00806] - Re: [Orchid] Retipping using laser welder

[andy_kroungold]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Scott 

    Are you having trouble with retipping or rebuilding the prongs I use
    28 ga metal and low setting that just melts wire to the tip. Place
    the wire on the portion of the prong away from the gemstone at the
    heaviest part. Rebuilding the prong... 14ky 220v 3.0ms and 5.0hz 10
    focus... If you need anything else you know give me or Liz a call....
    have a nice holiday 

Andy " The Tool Guy" Kroungold
Tool Sales / Technical
Stuller Inc
Phone 800-877-7777 ext. 94194
Fax 337-262-7791

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________