[Jewelry making - Article 00492] - Re: [Orchid] Homemade burnout kiln

[Alan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    A hotplate and any sort of heat resistant pot with a lid will do 
    Place  two lengths of 2x2 timber in the bottom of a pot, mine is an
    old pressure  cooker with the valve removed.  Fill to below the
    surface of the timber  top and place the flask upside down on the
    timber.  Replace the lid and  heat to boiling and leave for around
    20-60 minutes depending on flask  size.  I have a photo on my
    website which demonstrates this under "How to  cast jewellery" 

Alan Lewis
www.watchrepairer.co.uk

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________