[Jewelry making - Article 00032] - Re: [Orchid] Studio Flooring Options

[Ron Charlotte]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Vinyl sheet does need a stabilizing underlay.  It will not last long
    laid on plain OSB subflooring. 

    VCT is dirt cheap! It generally retails for less than a
    dollar/square foot ($35 for a box of 45 pieces), and anyone who can
    assemble a jigsaw puzzle could lay the flooring in a 12 X 16 space
    in a long afternoon.  I'd have a layer of plywood laid to firm up
    the floor a bit and provide a smoother surface for the adhesive, but
    it's a pretty good choice. 

>         So, you dear creative people, what flooring do you have in
>     your studios? What works well? 

    I've got a concrete floor, but I work in a dried in carport... 

Ron Charlotte -- Gainesville, FL
ronch2 AT bellsouth.net OR afn03234 AT afn.org

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________