[Jewelry making - Article 01307] - [Orchid] Combined tourch setup

[Hsgonnella]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Howdy, I was wondering if it is advisable to have a flame working
    burner for glass (uses Oxy/propane), on the same lines as my
    oxy/propane jewelers torch.  Of course I would "T" or "Y" with some
    sort of valve, and I would only use one at a time. There could be a
    question about the regulators, but I havent thought it through that
    far. 

    I would really like to do this, unless it is moronic, of course.

Thanks, 
Holly

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________