[Jewelry making - Article 01183] - Re: [Orchid] Hallmark and where you live

[Ian W. Wright]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Lizzieq wrote "Will you comment on the various (hallmarking)
    procedures used in your country?" 

    In the UK all precious metal goods above certain weights (1 gram for
    gold, 7.78 grams for silver and 0.5 grams for platinum ) MUST by law,
    be sent to one of the five Assay Offices for testing and marking.
    Smaller items can be sent there also if you wish but that is not
    mandatory. Before you can submit items to an assay office, you must
    have a 'registered sponsor's mark' - your own makers mark, which has
    to be sent to the assay office in the form of the actual punches you
    are going to use and, at the assay office, these are stamped into
    large copper 'record sheets' which the assay office keeps for all
    time, your details are entered into the registers and the punches
    themselves are stamped with the official assay office crest and a
    serial number. Each separate part of an object is tested as is any
    solder used and each part receives at least the caratage hallmark.
    The main parts also get the full assay office/carat/date letter
    mark. In most cases the assay done is still by the old method of
    taking scrapings from the metal, weighing them, wrapping them in lead
    foil and heating them in a special crucible which absorbs the lead
    and the alloying elements in the metal to leave a bead of the
    precious metal and then weighing this bead. Comparing the two weights
    gives the caratage. For delicate or very small items, they are now
    also using an X-ray diffraction machine which gives an accurate
    estimation of the metal proportions but this has a disadvantage in
    that it only looks at the surface of the metal and so could be fooled
    unless used by a very skilled and canny operative. Because of the
    physical scraping done to get the metal sample it is usual to submit
    work in an unfinished form so that all the parts and the solder to be
    used are sent before the piece is finally assembled (this
    particularly applies to bigger pieces of plate such as teapots
    etc.), also the striking of the assay punches into the metal will, of
    course, leave blemishes on plate etc. which will need to be polished
    out. A recent development is the use of lasers to apply the hallmark
    to delicate objects but this has a disadvantage in that it is only a
    surface marking and could easily be removed unlike punch marking
    which physically changes the structure of the metal under the mark
    such that it could be forensically recreated even if the mark had
    been filed out.. Where a batch of similar items are submitted for
    assay such as a batch of chains etc., random samples will be taken
    and tested - maybe 3 or 4 complete chains out of 100 and the whole
    batch marked on the basis of this assay. 

    The advantages of this method over that practiced in the US is that
    it is centrally controlled and entirely out of the hands of the
    jewellery maker and is legally required before any item can be sold
    as precious metal (unhallmarked silver can only be sold as 'white
    metal' for example). The registered sponsors mark allows the maker to
    be traced at any time (for hundreds of years either way) and the date
    letter is useful in determining the time of manufacture - i.e.
    spotting modern reproductions of antique pieces etc. The
    disadvantage is that it introduces a delay in the manufacturing
    process and additional costs in fees and postage. Whilst some abuses
    of the system can take place these are usually confined to
    unscrupulous people sawing the hallmark out of a low value piece and
    soldering it into a high value piece and can be easily spotted by,
    for instance, simply breathing onto the area around the hallmark to
    reveal the solder line. 

    The US system, as I see it, is wide open to abuse and relies totally
    on the honesty of the individual. Without actually testing the metal
    you start with are you sure the karatage is exactly as the supplier
    states or have they sent you the wrong metal? How can you rely on the
    makers mark to verify the truth of the marked karatage - it is very
    easy to have a spurious marking punch made which wouldn't be
    traceable back to you. 

    Give me the UK system any time, it is 99.99% reliable! 

Best Wishes,

Ian
Ian W. Wright
Sheffield  UK

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________