[Jewelry making - Article 00911] - Re: [Orchid] Re-flatten warped sheet silver

[Lee Einer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    One thing which has worked for me in the past (somewhat) is to lay
    the sheet on my anvil, pick up another anvil (a small one, maybe 10
    pounds in weight) with the business end down, and wham it down upon
    the offending sheet. You want to do this with an anvil with no
    irregularities, as any roughness on the anvil will be transferred to
    the sheet. 

Lee Einer
Dos Manos Jewelry
http://www.dosmanosjewelry.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________