[Jewelry making - Article 00524] - Re: [Orchid] Air trapped air wax mold

[Tony Daniello]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The dusting with powder of the vents is the correct approach. Be
    sure to lead the vent cut to the outside of the mold for proper
    release. Check to see if the nipple on your wax pot is mating
    properly with the mold button. Some other things that you may want to
    check is whether your wax in the pot is trapping air or moisture. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________