[Jewelry making - Article 00504] - Re: [Orchid] Learning about Precious Metal Clay

[Hsgonnella]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>       I am  wondering if PMC could behave like regular clay used for
>     ceramics when recycling from dry. 

    An Orchid member sent me this good info by email: 

          I have been working with PMC for about four years and find it
          easiest to rehydrate from the totally dry state.  Chop the clay
          into the tiniest pieces you can (I use a craft knife/tissue
          blade) then crush into power with a mortor and pestle. 
          Depending on the amount of clay you're rehydrating... Add water
          one drop at a time just until it will form into a *crumb-y*
          ball, then transfer it to a folded piece of heavy plastic
          (like a jewelry bag) and knead until perfect. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________