[Jewelry making - Article 00135] - Re: [Orchid] Cutting jump rings

[Janet]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>         cutting jump rings with a razor 

    Charles discussed this right here in Ganoksin! The description and 
    illustration are at

    http://www.ganoksin.com/borisat/nenam/jumpring.htm 

    If any Orchidians have tried it, please tell us about it, e.g., how
    thick  the wire can be, what the cut ends are like, does the process
    distort the  rings, etc. 

Janet

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________