[Jewelry making - Article 00025] - Re: [Orchid] Durston Guillotine Shear

[Kate Wolf]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     How well does it keep the non-ferrous metal edges flat, especially
>     on 18-22 gauges? It's been my experience with guillotine shears to
>     curl the edges. 

    Hi Debi, Thanks for you kind words about my workshop! The shear does
    round the edge slightly, but not as much as bench shears and
    guillotine shears I have used. 

Have a delightful day!
-Kate Wolf in windy and warm Portland Maine.
http://www.wolfwax.com
http://www.wolftools.biz
Workshops at Wolf Designs http://www.katewolfdesigns.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________