[Jewelry making - Article 00143] - Re: [Orchid] Laser welding eyeglasses

[Antonio Cecena]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Scott

    Try the 14k white gold /palladium , this works well with Titanium,
    its seem to be a little more for giving than using just white
    w/nickel  or silver solder. The new Titanium is very challenging
    especially the round wire frames. I had repaired a pair that broke
    at the bridge , I nail it the first attempt so I torqued the frames
    just to make sure it was going to hold and what happens, the other
    side breaks . Luckily I was able to repair it easily. With all frames
    I use ARGON !!!! 

Good Luck
Tony  AT  Cecenas Jewelry
any Q's email me off line

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________