[Jewelry making - Article 00059] - Re: [Orchid] Centrifugal Casting Drum / Shell

[Allan Creates]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     With my Vacuum Casting unit broken, which is really a blessing in
>     that I never was confident that it would provide the expected 

    Just install your spinner inside a simple old style wash tub. Bolt it
    down onto a solid bolted down table. 

Allan Creates
P.O. Box 51 Cote St-Luc
Montreal Quebec
Canada
Tel:  514-488-7553
Fax:  514-489-7299
Superringfit.com
Perfectly Fabulous Fit Arthritic Shanks

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________