[Jewelry making - Article 01072] - Re: [Orchid] [Source] Titanium sheet

[James Binnion]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Try McMaster-Carr at http://www.mcmaster.com it is a 6"x 6" sheet but
    you can cut it down 

  	Part Number  9051K11
  	$16.50 Each
  	Shape Sheets
  	Sheet Type Plain
  	Material Grade 2 (40KSI-YS) Titanium
  	Finish/Coating Unpolished (Mill)
  	Length 6"
  	Length Tolerance +1/8"
  	Width 6"
  	Width Tolerance +1/8"
  	Thickness 0.35"
  	Thickness Tolerance 1.004"
  	Specifications Met ASTM B265

    Standard disclaimer, just a satisfied customer 

Jim Binnion

James Binnion Metal Arts
Phone (360) 756-6550
Toll Free (877) 408 7287
=46ax (360) 756-2160
http://www.mokume-gane.com
jbin AT mokume-gane.com
Member of the Better Business Bureau



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________