[Jewelry making - Article 01063] - Re: [Orchid] Chicago Pneumatic Air Scribe

[Silver Mouse]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    A question about the Chicago Pneumatic Air Scribe mentioned a couple
    of days ago.... Can this be used to peen a fairly thick head on10
    ga. wire? I use a 2 oz. ball peen hammer now but wouldn't mind
    something a little quicker/more efficient. It looks to me to be too
    light-weight for this application but they mention this application
    in the write-ups I read on one tool-dealer's web site. If it can
    handle it, would it be harder on the hand and wrist than a
    light-weight hammer? 

Edward


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________