[Jewelry making - Article 00855] - Re: [Orchid] Getting the pickle out of hollow forms

[Grace]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Carla,  I make many hollow forms and I usually boil out the
    pickle after soldering.  Then I remove the excess water after boiling
    with a tiny syringe.  That system  works very well for me.  Give it a
    try.  Of course, dedicate a pan to the process!! 

Grace,  Cleveland


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________