[Jewelry making - Article 00116] - Re: [Orchid] Little Torch on big tank

[Cathy]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have a Little Torch (propane) and 02 setup.  My O2 tank is a 40 cf
    (short) tank so I don't really have to keep it chained to keep it
    from falling over, it's a pretty squatty little tank.  When full, it
    contains 2000 pounds of pressure.  I'm using a dual stage regulator,
    and I run my torch at 14 lbs of 02 when in use.  This is what the
    manual says to use (15 actually).  Hope this helps. 

 Cathy Flory
 Owner/Designer
 JEWELWORKS
 www.jewel-works.com


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________