[Jewelry making - Article 00091] - Re: [Orchid] Before rolling mills

[Michael Honeycutt]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Well it's been said enough that I don't have to repeat it. Right now
    the hammer and anvil technique is what I use when I need something a
    certain size and all I have is too big. It's boring but effective.
    In a lot of ways it seems to add some character to the pieces as
    well. I tend to make work that is aimed at the early, post-modern,
    pre-apocalyptic hippie unwashed "Tribal" masses anyway so hammer
    marks fit in nicely.    Mike 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________